Name: Prime Hardware
Rating: 4.9 (110 reviews)

Description & Specifications FAQs

Kilargo

KILARGO IS3016SI REBATED BOTTOM SEAL - AVAILABLE IN VARIOUS SIZES

The Kilargo IS3016si is a rebated door bottom seal cleverly concealed in a groove in the bottom edge of single and double swing timber doors. Its silicone gasket seals gaps of 5–9mm against medium and ambient temperature smoke, sound, dust, light, weather and vermin – and it can be surface-mounted or rebated deeper for depth adjustment.

Rebated & concealedGap 5–9mmSmoke & acousticTimber doors

Key Features

Conceals neatly in a rebated groove – near invisible in service

May also be surface-mounted, or rebated further for depth adjustment

Silicone gasket seals against smoke, sound, dust, light, weather and vermin

Suits single and double swing timber doors

Conforms with BCA Specification C3.4 smoke sealing requirements; acoustically tested

Pre-drilled, slotted fixing holes with screws and instructions supplied

Silver anodised carrier, grey gasket (black on request); Australian made

What It's Used For

Use the IS3016si where a fixed (non-automatic) door bottom seal is preferred and the joinery allows a rebate – apartment doors, offices, hotel rooms and heritage doors where the seal must disappear into the door edge.

It pairs with Kilargo perimeter seals to complete the smoke, acoustic and draught barrier around the whole door.

Specifications

Type	Rebated door bottom seal (fixed sweep type)
Suits	Single & double swing timber doors
Gap size	5–9mm
Mounting	Rebated (concealed) or surface-mounted
Finish	Silver anodised, grey silicone gasket (black on request)
Antimicrobial option	Yes – select at checkout (AM silicone gasket)
Available sizes	1000mm, 1250mm, 1500mm, 1750mm, 2000mm, 2250mm, 2500mm, 2750mm, 3000mm, 3500mm, 4000mm, 4500mm, 5000mm
MPN	IS3016si

Compliance & What It Means

Smoke sealing — BCA/NCC Specification C3.4. Conforms with Building Code of Australia (NCC) Specification C3.4 smoke sealing requirements. Smoke — not flame — is the biggest killer in building fires, and C3.4 sets out how door gaps must be sealed so escape routes stay clear of smoke.

Acoustic tested — AS 1191 / ISO 140-3 / ISO 10140-2. Acoustically tested in accordance with AS 1191, ISO 140-3 and ISO 10140-2 — the laboratory standards for measuring sound insulation. Correctly sealed doors are the difference between a quiet room and a noisy one; this seal is proven to cut sound leakage through the door gaps.

Antimicrobial option available. Also offered in an antimicrobial (AM) silicone version, formulated to inhibit the growth of bacteria and mould on the gasket surface — specified in hospitals, aged care, laboratories and food-preparation areas.

Fire and smoke approvals apply to tested, proprietary door assemblies. Always confirm suitability for your specific door type and required rating with your fire door manufacturer or building certifier.

Ordering & dispatch. This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory line. Please allow a standard handling time of 5–8 business days after cleared payment before dispatch. Need it sooner, or not sure which seal suits your door? Call Prime Hardware on 1800 329 028.

What gap does the IS3016si seal?

It suits gaps of 5–9mm. Measure between the door bottom (or stile) and the sealing surface with the door closed; outside this range, call Prime Hardware on 1800 329 028 for the right alternative.

How is it installed?

Fixing screws are supplied with detailed fitting instructions, and the fixing holes are pre-drilled (and slotted where applicable) so the seal can be positioned and adjusted accurately against the floor or threshold before final tightening.

What lengths are available?

Standard lengths are 1000mm and 2250mm, with 250mm increments available from 1000mm to 5000mm. Seals can be cut down on site for an exact door width.

Is a rebated seal better than a surface-mounted one?

Rebating conceals the carrier inside the door for a cleaner look and protects the seal from knocks. Surface mounting is faster and lets you adjust the height without machining. The IS3016si supports both, so you can choose per door.

What is the handling time for this item?

This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory. Allow a standard handling time of 5–8 business days after cleared payment before dispatch. If your project needs express turnaround, call Prime Hardware on 1800 329 028 to confirm current factory lead times.

I'm not sure this is the right seal for my door — can I get help?

Yes. Door sealing depends on your door type, the gap sizes and what you need to seal against (fire, smoke, sound, weather or drafts). Call Prime Hardware on 1800 329 028 with your door details and gap measurements and we'll confirm the right Kilargo seal, size and finish before you order.