KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
KILARGO IS5110B 13MM BRUSH INSERT - primehardware
Kilargo
SKU: KILIS5110B1000

KILARGO IS5110B 13MM BRUSH INSERT

SIZE:: 1000mm
COLOUR OR FINISH:: Black
$34.14 $41.63
You Save $7.49 (17% Off)
Tax included. Shipping calculated at checkout
Availability
Online: In Stock

Ships within 4–6 business days

Showroom: Check before visiting

Call us to confirm pickup availability.

Stock can move quickly. For urgent pickup, please call before visiting.
✓ Trusted by Builders, Designers & Renovators
🚚 Ships Australia Wide
↩ Easy 30 Day Returns
🔒 Secure Checkout Protection
Kilargo

KILARGO IS5110B 13MM BRUSH INSERT

The Kilargo IS5110B is a 13mm black nylon brush insert – the replacement brush strip for the Kilargo IS5110 brush seal carrier (or for mortising directly into a groove). Slide out the worn brush, slide in the new one, and the seal performs like the day it was installed.

13mm brush insertReplacement partBlack nylonFits IS5110

Key Features

13mm black nylon filaments locked into a galvanised steel strip
Replacement insert for the Kilargo IS5110 aluminium carrier
Can also be mortised into a nominal 3mm (w) x 4mm (d) groove
Slightly kink the strip for an interference fit – no adhesive needed
Restores draught, dust, insect and weather sealing at a fraction of replacement cost
Durability tested beyond 100,000 open/close cycles
Australian made

What It's Used For

Brush filaments wear with traffic – replacing the insert (not the whole seal) is the economical fix. Use the IS5110B to re-brush existing IS5110 carriers on garage, roller, swing and commercial doors.

It can also be fitted brush-only into a machined groove in timber or aluminium doors and windows.

Specifications

Type Nylon brush insert (brush only)
Brush 13mm black nylon, galvanised steel spine
Fits Kilargo IS5110 carrier, or 3mm x 4mm mortised groove
Colour Black
Available sizes 1000mm, 1250mm, 1500mm, 1750mm, 2000mm, 2250mm, 2500mm, 2750mm, 3000mm
Available finishes Black
MPN IS5110B

Compliance & What It Means

Maintains your door's compliance. Seals only perform — and only satisfy fire, smoke and acoustic requirements — while their gaskets and components are intact. Replacing a worn, torn or hardened part with the genuine Kilargo component restores the sealing performance the door assembly was originally tested and certified with.
Durability — 100,000+ cycles. Durability tested through more than 100,000 open-and-close cycles, so it keeps performing in busy commercial and residential doorways.
Ordering & dispatch. This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory line. Please allow a standard handling time of 5–8 business days after cleared payment before dispatch. Need it sooner, or not sure which seal suits your door? Call Prime Hardware on 1800 329 028.
How do I fit the IS5110B insert?

Slide the worn brush strip out of the end of the carrier, then feed in the new insert with a slight kink along its length so it grips (interference fit). For brush-only installation, mortise a nominal 3mm wide x 4mm deep groove and press the strip in.

Which carriers does it fit?

It's made for the Kilargo IS5110 aluminium carrier, and suits any groove or channel matching its galvanised spine profile. Check your existing brush width before ordering.

What is the handling time for this item?

This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory. Allow a standard handling time of 5–8 business days after cleared payment before dispatch. If your project needs express turnaround, call Prime Hardware on 1800 329 028 to confirm current factory lead times.

I'm not sure this is the right seal for my door — can I get help?

Yes. Door sealing depends on your door type, the gap sizes and what you need to seal against (fire, smoke, sound, weather or drafts). Call Prime Hardware on 1800 329 028 with your door details and gap measurements and we'll confirm the right Kilargo seal, size and finish before you order.