KILARGO IS7080 DOOR PERIMETER SEAL SET - AVAILABLE IN VARIOUS SIZES
KILARGO IS7080 DOOR PERIMETER SEAL SET - AVAILABLE IN VARIOUS SIZES
The Kilargo IS7080 Door Perimeter Seal Set packages head and jamb lengths for a complete door. Installed in lieu of the door stop on steel or timber frames (non fire-rated), its elastomeric gasket closes gaps of 0–10 mm against sound, cold smoke, light and weather. Door sets take the guesswork out of ordering: a Single Door Set contains 1 x 1000mm (head) and 2 x 2100mm (jambs); a Long Single 1 x 1000mm and 2 x 2750mm; a Double 3 x 2100mm; and a Long Double 1 x 2100mm and 2 x 2750mm.
Key Features
What It's Used For
Use the IS7080 on non fire-rated doors in offices, apartments, hotels and commercial buildings where the frame has no stop – or where the stop is being replaced – and you want an acoustic and draught seal built into the stop itself.
For fire doors or where silicone smoke performance is required, step up to the silicone-gasket IS7080si version, which is fire tested and smoke approved.
Specifications
| Type | Perimeter seal – installs in lieu of door stop |
| Suits | Single-swing doors, steel or timber frames (non fire-rated) |
| Gap size | Min. 0mm / max. 10mm |
| Fixing | Pre-drilled & slotted holes; cover strip conceals screws |
| Finish | Silver anodised, black gasket, grey cover strip |
| Available sizes | Double Door Set, Single Door Set, Long Double Door Set, Long Single Door Set |
| MPN | IS7080 |
Compliance & What It Means
What is included in a IS7080 door set?
A Single Door Set includes 1 x 1000mm length for the head and 2 x 2100mm for the jambs. Long Single: 1 x 1000mm + 2 x 2750mm. Double Door Set: 3 x 2100mm. Long Double: 1 x 2100mm + 2 x 2750mm. Lengths cut down on site for a neat mitred or butted fit.
What's the difference between the IS7080 and IS7080si?
The IS7080 has a standard elastomeric gasket and suits non fire-rated doors. The IS7080si uses a silicone gasket and is fire tested to AS 1530.4 plus smoke approved to AS 1530.7 - choose the si version for fire doors, smoke doors or hygiene-critical areas.
Where is the IS7080 fitted on the door?
It is fitted around the door frame perimeter - across the head and down both jambs - installed in place of the door stop itself. The door bottom is sealed separately (pair it with a Kilargo automatic door bottom seal or threshold seal for a complete system).
What door gap does the IS7080 seal?
It seals perimeter gaps of 0mm up to 10mm between the door leaf and the frame/stop. Measure your gap with the door closed; if it varies or falls outside this range, an adjustable Kilargo perimeter seal may suit better - call Prime Hardware on 1800 329 028 for advice.
Do I need a long-backset latch with the IS7080?
When fixing to rebated frames of single doors, yes - specify a long-backset door latch so the latch furniture clears the seal.
What is the handling time for this item?
This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory. Allow a standard handling time of 5–8 business days after cleared payment before dispatch. If your project needs express turnaround, call Prime Hardware on 1800 329 028 to confirm current factory lead times.
I'm not sure this is the right seal for my door — can I get help?
Yes. Door sealing depends on your door type, the gap sizes and what you need to seal against (fire, smoke, sound, weather or drafts). Call Prime Hardware on 1800 329 028 with your door details and gap measurements and we'll confirm the right Kilargo seal, size and finish before you order.
