Lockwood 1 Point Exit Device 60Mm Bs Mortice Lock 1200Mm Sil Silver FE112/0MSIL
Lockwood 1 Point Exit Device 60Mm Bs Mortice Lock 1200Mm Sil Silver FE112/0MSIL
This Lockwood Fluid Series exit (panic) device provides single-action egress on emergency-exit and fire-rated doors: pushing the bar retracts the latch(es) and opens the door in one motion. It is designed for use on emergency-exit and fire-rated egress doors.
Specifications
| Type | 1-point mortice-locking exit device |
| Bar / device width | 1200 mm |
| Locking points | Single latching point |
| Finish | Silver |
Standards & Compliance
- Single-action egress hardware for emergency-exit and fire-rated doors.
Available Finishes
Swatch colours are indicative only. Living finishes develop a natural patina over time.
Warranty
Mechanical parts are warranted against defects in materials and workmanship under normal use, when correctly installed. Manufactured by ASSA ABLOY Australia. Lockwood warranty →
What is an exit (panic) device?
It is egress hardware that lets people leave through an emergency-exit or fire door in a single action — pushing the bar or bolt retracts the latch and opens the door immediately, without a key or knob.
Where is it used?
On emergency-exit and fire-rated egress doors in commercial and public buildings, where fast, unobstructed exit is required.
What does cylinder dogging mean?
On dogging models, a key can hold the latch retracted so the door pushes open freely during busy periods; the device re-latches when un-dogged.
Is this finish in stock?
Silver and Black finishes are normally held in stock with the supplier. All other finishes (and no-finish/raw components) are made to order — call Prime Hardware on 1800 329 028 to confirm availability and lead time before you order.
What warranty applies?
Lockwood products carry a 25-Year Mechanical Warranty against defects in materials and workmanship. Electrical/electronic components, where fitted, carry a separate electronic warranty. Manufactured by ASSA ABLOY Australia.
How can I get help?
Call Prime Hardware on 1800 329 028, email sales@primehardware.com.au, or visit the showroom at 2/249 Annangrove Road, Annangrove NSW 2156. We can confirm sizing, finishes and matching components before you order.
