Austyle Integrated Flush Pull & Offset Pull Handle — Back-to-Back | Satin Stainless 304SS
You May Also Need
This product is included in the bundle below
Superior Brass Adjustable Striker Plate for Sliding Door Lock x9285/49425 Satin Stainless Steel 260x12mm.
Austyle Flush Pull Back-to-Back 295x40mm – Satin Stainless Steel
Superior Brass 316 Stainless Steel Fixed Pin Hinge 100x75mm Satin Stainless Steel 100x75x2.5mm (Pair)
Austyle Integrated Flush Pull & Offset Pull Handle — Back-to-Back | Satin Stainless 304SS
Austyle · Architectural Hardware Integrated Back-2-Back Flush Pull & Handle — Linear (Sliding Door Kit) One coordinated kit for a complete lockable sliding or cavity door. The Austyle 43967 pairs a recessed flush pull with an offset pull handle and the myLOCK sliding door lock , so the door pulls smoothly, sits flush when recessed, and locks securely — all in one matched, back-to-back set. 316 Stainless Steel Back-to-Back Fixing 275mm C/C 50mm Projection myLOCK Sliding Door Kit Satin SS or Black What's in the Box ✓ Integrated flush pull & offset pull handle — back-to-back pair (Linear) ✓ myLOCK sliding door lock (49285) ✓ Euro cylinder ✓ Rectangle escutcheon (pair) ✓ 2 × M6 × 80mm CSK cross-recess stainless steel screws Please note: on the base (non-KIT) configuration the euro cylinder and rectangle escutcheon may be supplied separately — order the KIT code for the complete lockable set. Bundle Guide Step 1 — The pull set (operate & recess the door) Handle / Flush pull Integrated back-to-back flush pull + offset handle, 295×40mm plate, 30×15×305mm handle Step 2 — The lock (latch & lock the door) myLOCK 49285 Sliding door lock, key / snib operation, security-rated Step 3 — Cylinder & escutcheon (key it & finish it) Euro cylinder Narrow euro cylinder to suit cavity recess Rectangle escutcheon (pair) Covers the cylinder either side of the door Function recipes Non-locking slider Pull set only (Step 1) Locking cavity / slider Full 43967KIT = Step 1 + Step 2 + Step 3 Specifications Base code / KIT x3967KIT (3967) Fixing Back-to-back (through-fixed) Flush plate 295 × 40mm Pull handle 30 × 15mm profile × 305mm length Centre-to-Centre (C/C) 275mm Projection / Offset 50mm / 100mm Material 316 Stainless Steel Suits lock myLOCK sliding door lock 49285 Fixings supplied 2 × M6 × 80mm CSK cross-recess SS Supplied as Matched kit / pair Available Finishes Satin Stainless Steel 43967KIT/SSS Matt Black 53967KIT/BLACK 12 Month Mechanical Warranty Covers mechanical operation when correctly installed and maintained under normal conditions.
Available Finishes & Product Codes
This item is made in the finishes below. Each finish has its own product code.
| Finish | Product code |
|---|---|
| Matt Black | 53967 |
| Stainless Steel | 43967 |
Living finishes such as antique and unlacquered brass develop a natural patina over time.
Specifications
| Fixing | 275mm C/C 50mm |
| Length | Centre-to-Centre (C/C) 275mm |
Warranty
Covers defects in materials and workmanship under normal use, when correctly installed. Applied as a standard-range product.
ⓘFinish careWipe with a soft, damp cloth. Avoid abrasive cleaners. Living finishes patina naturally over time.
What is the Austyle Integrated Flush Pull & Offset Pull Handle — Back-to-Back | Satin Stainless 304SS?
It is a Superior Brass flush pull. Product code 43967.
What finishes is this available in?
This item is made in Matt Black, Stainless Steel. Each finish has its own product code — see the finishes table in the description.
What warranty does it carry?
12-Month Statutory Mechanical Warranty, covering defects in materials and workmanship under normal use when correctly installed. It is applied as a standard-range product.
How do I care for the finish?
Wipe with a soft, damp cloth and dry. Avoid abrasive cleaners and solvents. Living finishes such as antique and unlacquered brass are designed to develop a natural patina over time.
How can I get help?
Call Prime Hardware on 1800 329 028, email sales@primehardware.com.au, or visit the showroom at 2/249 Annangrove Road, Annangrove NSW 2156.
