Zanda Polo Offset Pull Handle 600mm CTC — Face Fix
Zanda Polo Offset Pull Handle 600mm CTC — Face Fix
The Zanda Polo Offset Pull Handle 600mm CTC — Face Fix is a Zanda pull handle for entrance and commercial doors, available in Satin Brass. Key dimensions: length 640mm, centre to centre 600mm. Made from aluminium. Zanda product code shown below.
Available Finishes (1) & Product Codes
| Finish | Face Fix |
|---|---|
| Satin Brass | 7122.FF.SB |
Living finishes such as Polished and Brushed Brass develop a natural patina over time.
Specifications
| Brand | Zanda |
| Range | Polo |
| Product type | Offset entrance pull handle |
| Product code | 7122.FF.SB |
| Zanda set | 7122 — Polo Offset Pull Handle, 640mm (600mm Crs) |
| Finish | Satin Brass |
| Material | 316 marine grade stainless steel |
| Dimensions | 600mm centres, 640mm overall, 40 x 20mm bar, 110mm projection, 60mm offset |
| Bar size | 40 x 20mm |
| Fixing | Face fix (single) — suits timber doors |
| Application | Timber, aluminium and glass-infill doors |
| Compliance | AS1428.1 disabled access compliant (per Zanda) |
| Warranty | 20-year manufacturer mechanical warranty |
Warranty
20-year manufacturer mechanical warranty. Zanda covers this product against defects in materials and workmanship under normal use, when installed and maintained as directed.
ⓘFinish careWipe with a soft, damp cloth. Avoid abrasive cleaners. Living finishes develop a natural patina over time.
What is the Zanda Polo Offset Pull Handle 600mm CTC — Face Fix?
It is a Zanda offset entrance pull handle from the Polo range, made from 316 marine grade stainless steel. Product code: 7122.FF.SB.
What is included in this set?
Polo Offset Pull Handle, 640mm (600mm Crs). Hinges, door stops and flush bolts are sold separately.
What finishes is it available in?
This listing is finished in Satin Brass. Other Zanda finishes may be available — contact us to check.
What are the dimensions?
Dimensions: 600mm centres, 640mm overall, 40 x 20mm bar, 110mm projection, 60mm offset; Bar size: 40 x 20mm.
What is the difference between back to back, face fix and rear fix?
Back to back (pair) joins two handles through the door and suits timber, aluminium and glass doors. Face fix (single) screws through the handle into the door face and suits timber doors. Rear fix (single) fixes from the back of the door and suits timber and aluminium doors. Zanda's rear-fixing bolts are 7312 (M8) and 7340 (M6) for timber and aluminium doors, and 7304 (M8) and 7305 (M6) for glass doors.
How do I lock a door that uses a pull handle?
Pull handles have no latch, so pair them with a lock kit — Zanda's roller lock kits (roller bolt with deadbolt, 57mm backset) or double turn lock kits (1143 euro mortice lock with turn snibs) are made for this.
Is it disabled access compliant?
AS1428.1 disabled access compliant (per Zanda). Always confirm requirements with your certifier for the specific project.
Can it be used outdoors?
Yes. 316 marine grade stainless steel resists corrosion, making it suitable for external and coastal doors. Clean it regularly with fresh water and a soft cloth.
What warranty does it have?
20-year manufacturer mechanical warranty, covering defects in materials and workmanship under normal use when correctly installed.
How can I get help choosing the right product?
Call Prime Hardware on 1800 329 028 (Mon–Fri 10am–5pm), email sales@primehardware.com.au, or visit our showroom at 2/249 Annangrove Road, Annangrove NSW 2156, where over 6,000 products are on display. Send us your door type, thickness and the function you need and we will confirm the right parts.
